send link to app

ADIT MARINE


4.2 ( 8592 ratings )
Produktivität
Entwickler Tim Dawson
Frei

ADIT MARINE app is used as a controller for the bluetooth flushing system supplied by Adit marine.

Once the ADIT MARINE app is installed, you can connect to the Bluetooth flushing system already installed on your boat by using the BLE name and BLE serial no. found on the Bluetooth interface module.

With ADIT MARINE app you can use your smartphone as controller for the bluetooth flushing system and when connected to the system you can
- Turn on fresh water flush cycle for your Main Engines, Generator and Airconditioner on your boat.
- See the current in amps for the Valve and Pump during a flush cycle.
- See the count down time remaining for each flush cycle.
- See if there is any fault happened during the flush cycle, for eg: No water flow through the Valve, Under current or Over current fault on the valve or pump etc.

when selected flush cycle is in function and the count down time reaches the final 10 seconds , the phone will make a ticking sound to notify you that the device being flushed can be shut down to allow the sea strainer to be backed flushed, removing any items picked up and getting fresh water back to the skin fitting to stop the growth of Barnacles inside the cooling system.

Note: This app will only work with Bluetooth flushing system from Adit marine.

You can find more information about bluetooth flushing system on https://aditmarine.com.au/product/electronic-flushing-system-for-2-x-3-motors/